Bredal F4 - Lubrication Points and Intervals; 50-Hour Lubrication Points; PTO Shaft Lubrication; 100-Hour Lubrication Points

60
LUBRICATION POINTS
The dierent lubrication points on the implement are shown below. The number of operating hours for each lubricating interval is specied at each
lubricating point.
> Every 50 hours
PTO sha Disassemble the PTO sha and lubricate the 6-grooved ends with grease.
Input sha on the spread unit.
Floor belt guide rollers (2 for each belt)
> Every 100 hours