Bredal F4 - Connecting the Spreader to the Tractor; Mounting and Connection Instructions; Spreading Disc Height; Hydraulic Hose Connections

7
When connecting the spreader to the tractor, it is important that it is suspended horizontally or tilts slightly forward to obtain the best possible
spreading results.
The spreader must not tilt backwards, not even when the hopper is full. The spreader must be mounted directly behind the tractor, i.e. perpendicular
to the direction of travel, and it must be centred squarely on the tractor’s central axis. The stabiliser chain assemblies must be fully tightened.
The spreading discs’ height above crops must be approx. 85–90 cm.
The hydraulic hoses for operating the application process must be connected to a dual-action outlet on the tractor; 50–60 litres/min. are needed.
The hydraulic hoses for operating headland gear are connected to a dual-action outlet.
The hydraulic hoses for operating a hydraulic hopper ring are connected to a dual-action outlet.
The light plug is inserted in the tractor’s light outlet.
The ISOBUS plug is inserted in the tractor’s ISOBUS socket.
Connect the PTO sha to the tractor’s PTO.
CONNECTING THE SPREADER
85–90 cm