Bredal F4 - EU DECLARATION OF CONFORMITY; Manufacturer Identification; BREDAL Type F4 Serial Number; Spreader Master Data Plate

A series of values are entered in the computer of each individual spreader. If a value is mistakenly deleted from the computer, it is possible to
re-enter the original value.
The following values must be entered in the computer in order for all functions to work properly:
(Machinery Directive 2006/42/EF, Annex II, supplement A)
Manufacturer: BREDAL A/S
Nimvej 1
DK-7120 Vejle Ø
hereby declares that
BREDAL Type F4 serial number
is manufactured in conformity with the Machinery Directive (Directive 2006/42/EC), as amended, and with national provisions.
Bredal DK-7120 Vejle Ø August 2016
> EU Declaration of Conformity
The spreader’s rating plate species the model designation, year of manufacture, net weight, serial number and total weight.
> The spreader’s master data
Errors and omissions excepted.
The terms and conditions of sale and delivery can be found on www.bredal.com/en/betingelser
Weighing:
Calibration gures
Zero load value
Application rate:
Volume per impulse