Dear Valued Customer,
You have acquired a Silver edger. We would like to thank you for the
confidence you have shown in our brand.
This edger has been manufactured with the greatest care. Before
using it in the best possible conditions, we advise you to read this
manual carefully and to keep it near your workstation, where you will
be able to refer to it easily.
The information contained in this manual does not form a contract
and can be modified without notice. Such a document may contain
errors or omissions although everything has been done to avoid
them. Briot cannot, in any circumstances, be held responsible for
any possible defects that might result from the errors or omissions.
2, rue Roger Bonnet
27340 PONT DE L'ARCHE
FRANCE
Tél. : (33) 02 32 98 91 32 - Fax : (33) 02 35 02 02 94
To Next Page
Loading...
