Maintenance
Silver FC 00 511 43
User maintenance
To keep your edger in perfect condition, we recommend you:
• to remove the glass and CR 39 dust daily, using clean water and a soft sponge or a brush so
as not to scratch the plastic surfaces.
• to remove the dust carefully from the Scanform™ tracer tip.
• to clean the edging wheels regularly.
• to clean the visor regularly.
• to change the screen protector when it is scratched or worn.
• to replace the lens feeler tip when it is bent.
• to change the water in the tank regularly if your machine operates in a closed circuit.
To Next Page
Loading...
