18 Silver FC 00 511
Key Function/description
Make it possible, in combination with the following key:
to consult the statistics with regard to:
9 the lens counters
9 the wheel dressing
9 the lens feeler calibration
to access the screens with regard to the adjustment of:
9 the temperature compensation
9 the operator’s language
9 the memory management
9 the size correction
to increase the screen brightness
to access the screens with regard to:
9 the wheel dressing
9 the size adjustment
(use a digital caliper rule
with an accuracy of 1/100th mm)
9 the replacement of the lens feeler tip
9 the adjustment of the Scanform™
9 to access the lens feeler calibration screen
to decrease the screen brightness.
to reverse the screen color.
to enter a positive numerical value
to enter a negative numerical value
Validate a function.
Make it possible to carry out an emergency stop for edging.
Unmarked key (Fct0 to Fct5), its meaning depends of the parameter displayed
to the left of this key.
Unmarked key (Fct6 to Fct9), its meaning depends of the parameter displayed
facing this key.
Initial Display
When turned on, the edger initializes automatically and displays the following screen.
To Next Page
Loading...
