Brocade Communications Systems MLX Series User Manual

106 Brocade MLX Series and NetIron XMR Hardware Installation Guide
53-1002373-02
Mounting Brocade MLXe-4, -8, or -16 routers in a 4-post rack or cabinet
2
3. Attach the side plates to the router using 8 4-40 flat head screws. Refer to Figure 72.
FIGURE 72 Attach the side plates to the rear sides of the device
4. Attach the telescoping rails to the mounting posts in the cabinet or rack. Refer to Figure 73,
FIGURE 73 Attach telescoping rails to cabinet or rack mounting posts (one rail shown)

Brocade Communications Systems MLX Series Specifications

General

Brand	Brocade Communications Systems
Model	MLX Series
Category	Network Router
Language	English