Brocade MLX Series and Brocade NetIron XMR Hardware Installation Guide 387
53-1002373-02
Hardware specifications for Brocade NetIron XMR routers
9
Safety agency approvals
• CAN/CSA-C22.2 No. 60950-1-07/UL60950-1 – Second Edition, Safety of Information
Technology Equipment
• EN 60825-1 Safety of Laser Products – Part 1: Equipment Classification, Requirements and
User’s Guide
• EN 60825-2 Safety of Laser Products – Part 2: Safety of Optical Fibre Communications
Systems
• EN 60950-1:2006\IEC 60950-1:2005, Second Edition, Safety of Information Technology
Equipment
Electromagnetic approvals
• FCC Part 15, Subpart B (Class A)
• EN 55022 (CE mark) (Class A)
• EN 55024 (CE mark) (Immunity) for Information Technology Equipment
• ICES-003 (Canada) (Class A)
• AS/NZ 55022 (Australia) (Class A)
• VCCI (Japan) (Class A)
• EN 61000-3-2
• EN 61000-3-3
• EN 61000-6-1
Hardware specifications for Brocade NetIron XMR routers
The following sections describe hardware specifications for Brocade NetIron XMR routers.
Power specifications
The following power supply frequency requirements apply to Brocade NetIron XMR 4000, 8000,
and 16000 routers:
• AC Input Rating: 100 to 240V, 50/60 Hz, 16.0 A maximum per power supply
• AC Operating Voltage Range: 90 - 264V, 50/60 Hz
• Inrush current: 40A peak maximum at 25 degrees C (77 degrees F)
• DC Input Rating: -48V, 30.0 A maximum per power supply
• DC Operating Range: -40 to -60V
• Inrush current: 45A peak maximum at 25 degrees C (77 degrees F)
The following power supply frequency requirements apply to Brocade NetIron XMR 32000 routers:
• AC Input Rating: 200 -240V, 50/60 Hz, 16.0 A maximum per power supply
• AC Operating Voltage Range: 180-264V
• Inrush current: 30A peak maximum at 25 degrees C (77 degrees F)
• DC Input Rating: -48V, 60.0 A maximum per power supply
• DC Operating Range: -40 to -60V
To Next Page
Loading...
Need help?
General
