Brocade Communications Systems MLX Series - Page 166

148 Brocade MLX Series and Brocade NetIron XMR Hardware Installation Guide53-1002373-02
Installation precautions
3
CAUTION
Do not install the device in an environment where the operating ambient temperature might
exceed 40

C (104

F).
CAUTION
Make sure the airflow around the front, sides, and back of the device is not restricted.
CAUTION
If you do not install a module in a slot, you must keep the slot blank in place. If you run the device
with an uncovered slot, the system may overheat.
CAUTION
Never leave tools inside the device.