Brocade Communications Systems MLX Series

To Next Page

To Previous Page

40 Brocade MLX Series and Brocade NetIron XMR Hardware Installation Guide

53-1002373-02

Router modules

Power supply requirements for BR-MLX-1GFx24-X and BR-MLX-1GFx24-X-ML interface modules

Table 18 lists the power supply requirements for each type of router when installing 24-port 1 Gbps

fiber interface modules.

20-port 100/1000 Ethernet interface module

Figure 23 shows the front panel of the 20-port 100/1000 Gbps Ethernet SFP interface module.

FIGURE 23 20-port 100/1000 Ethernet module front panel

TABLE 18 Power supply requirements for 24-port 1 Gbps fiber interface module

Router type Number of 24-port 1

Gbps fiber interface

module installed

Power supply requirements

MLXe-4 three one 1200W PSU

for 1+1 redundancy, install two 1200W PSU

four two 1200W PSU

for 2+2 redundancy, install four 1200W PSU

MLX-4 and

Brocade NetIron

XMR 4000

four one 1200W PSU

for 1+1 redundancy, install two 1200W PSU

MLXe-8 seven two 1200W PSU

for 2+2 redundancy, install four 1200W PSU

eight three 1200W PSU

for 3+1 redundancy, install four 1200W PSU

Brocade NetIron

XMR 8000

eight two 1200W PSU

for 2+2 redundancy, install eight 1200W PSU

All 16-slot routers sixteen four 1200W PSU

for 4+4 redundancy, install eight 1200W PSU

All 32-slot routers thirty-two four 2400W PSU

for 4+4 redundancy, install eight 2400W PSU

Brocade Communications Systems MLX Series - Page 58