3 - 77
Feed module
Modules
Assembly
22
Spring attachment (for FPM holder assy.)
1. Attach spring to the feed base 1 and FPM holder assy. 2.
Start movie clip (CD-ROM version only)
S16
2
2
S16
S16
19.8
5
SPRING
XC2538***
23
Needle plate A assy. assembly
1. Attach the F gear stopper plate 1 and stopper plate 2 to needle plate A 3
using screws 1 (two).
Start movie clip (CD-ROM version only)
1
Torque
0.57 – 0.78 N
−
m
12
31
Screw, Bind
M2.6X3
Color; Silver
24
Feed dog attachment
1. Attach the feed dog 1 and hand start screws 1 (two).
(Fully tighten after 4 - 19 "Front/back, left/right position of feed dog
adjustment.")
Start movie clip (CD-ROM version only)
1
Torque
Hand start
1
1
Screw, Bind
M3X8
Color; Silver
25
Needle plate A assy. attachment
1. Attach needle plate A 1 using screws 1 (two).
Start movie clip (CD-ROM version only)
1
Torque
1.18 – 1.57 N
−
m
1
1
Screw
M4
Color; Silver
www.promelectroavtomat.ru