2-14
Confidential
Error
codes
Problem
Refer
to:
Error
codes
Problem
Refer
to:
C300 An unidentified error occurred. 2-50 DD00
Fuser unit error (except error
codes 6A00 to 6F00, 7600,
7800, DE00, and E200)
2-51
C400 An unidentified error occurred. 2-50 DE00
When the center thermistor of
the fuser unit is higher than the
idle temperature, the side
thermistor detected a
temperature lower than the
specified temperature.
2-52
C500 An unidentified error occurred. 2-50 DF00 An unidentified error occurred. 2-52
C600 An unidentified error occurred. 2-50 E000
An error occurred in the ROM
check sum.
2-52
C700
There is insufficient memory to
expand PC-print data.
2-50 E100 Program error 2-52
C800
The memory size allotted for
Secure Print was exceeded
when saving Secure Print data.
2-50 E200
When the center thermistor of
the fuser unit is higher than the
idle temperature, the side
thermistor detected a
temperature higher than the
specified temperature.
2-53
C900
Detected that DIMM was faulty
or was mounted incorrectly.
2-50
E300 An unidentified error occurred. 2-53
CA00 An unidentified error occurred. 2-51 E400 An unidentified error occurred. 2-53
CB00 An unidentified error occurred. 2-51 E600
Write error in the EEPROM of
the main PCB
2-53
CC00 An unidentified error occurred. 2-51 E700 An unidentified error occurred. 2-54
CD00 An unidentified error occurred. 2-51 E800 An unidentified error occurred. 2-54
CE00 An unidentified error occurred. 2-51 E900 An unidentified error occurred. 2-54
CF00 An unidentified error occurred. 2-51 EA00 An unidentified error occurred. 2-54
D000 An unidentified error occurred. 2-51 EB00 An unidentified error occurred. 2-54
D100 An unidentified error occurred. 2-51 EC00 Detected a main fan failure. 2-54
D200 An unidentified error occurred. 2-51 ED00
Communication between the
wireless LAN PCB and the main
PCB cannot be established at
machine startup.
2-54
D300 An unidentified error occurred. 2-51 EE00
Detected communication failure
after communication between
the wireless LAN PCB and the
main PCB was established.
2-54
D400 An unidentified error occurred. 2-51 EF00 The supplied power is unstable. 2-55
D500 An unidentified error occurred. 2-51 F000
Malfunction of the flash memory
on the main PCB
2-55
D600 An unidentified error occurred. 2-51 F100 An unidentified error occurred. 2-55
D700 An unidentified error occurred. 2-51 F200 An unidentified error occurred. 2-55
D800 An unidentified error occurred. 2-51 F300 An unidentified error occurred. 2-55
D900 An unidentified error occurred. 2-51 F400 An unidentified error occurred. 2-55
DA00 An unidentified error occurred. 2-51 F500 An unidentified error occurred. 2-55
DB00 An unidentified error occurred. 2-51 F600 An unidentified error occurred. 2-55
DC00 An unidentified error occurred. 2-51 F800 An unidentified error occurred. 2-55
To Next Page
Loading...
