5-10
Confidential
[2] Print worker switch (WSW) setting data (Function code 11)
< Function >
This function is used to print the worker switch settings and details.
< Operating Procedure >
(1) For models with touch panel
Press the [1] twice in the initial state of maintenance mode.
For models without touch panel
Press the [▲] or [▼] in the initial state of maintenance mode to display
“MAINTENANCE 11” on the LCD, and press the [OK].
(2) “PRINTING” is displayed on the LCD, and printing the CONFIGURATION LIST (refer to
the figure below) starts.
(3) When printing is completed, the machine returns to the initial state of maintenance mode.
Fig. 5-2
To Next Page
Loading...
