2-40
Confidential
No Toner Open the Top
Cover, then install
Toner Cartridge.
Black.
The toner amount detection
sensor detected that no toner
cartridge (black) was set.
6101 2-61
Open the Top
Cover, then install
Toner Cartridge.
Cyan.
The toner amount detection
sensor detected that no toner
cartridge (cyan) was set.
6104 2-61
Open the Top
Cover, then install
Toner Cartridge.
Magenta.
The toner amount detection
sensor detected that no toner
cartridge (magenta) was set.
6103 2-61
Open the Top
Cover, then install
Toner Cartridge.
Yellow.
The toner amount detection
sensor detected that no toner
cartridge (yellow) was set.
6102 2-61
No Tray T1 Reinstall Tray1.
The T1 paper feed sensor
detected that the T1 is open
when printing from the T1
(before the registration of
printing in the engine).
8501 2-70
The T1 paper feed sensor
detected that the T1 is open
when printing from the T1 (after
the registration of printing in the
engine).
8505 2-70
No Waste
Toner
Install the Waste
Toner Box.
The electrodes of the high-
voltage power supply PCB
detected that no waste toner
box was set.
6300 2-64
Out of
Memory
Press Stop[x].
The memory is insufficient to
expand the data of PC-Print.
C700 2-80
Print Data Full Secure Print Data
is full. Press
Stop[x] and delete
the previously
stored data.
The memory used to store
secure print data exceeded the
memory size for secure print
data.
C800 2-80
Print Unable
01
Turn the power off
and then back on
again.
ASIC error or motor driver error
occurred.
0101 2-48
Error message
Description
Error
codes
Refer
to:
First line Second line
To Next Page
Loading...
