2-41
Confidential
Print Unable
02
Turn the power off
and then back on
again.
Cannot detect the synchronized
signal of the paper feed motor.
The speed of the paper feed
motor does not stabilize within
the specified time.
0201 2-48
Cannot detect the synchronized
signal of the process motor. The
speed of the process motor
does not stabilize within the
specified time.
0202 2-48
Print Unable
05
Turn the power off
and then back on
again.
Detected the fuser unit
temperature error.
0501 2-49
0502 2-49
0503 2-49
0504 2-49
0505 2-49
0506 2-49
050A 2-50
050B 2-50
050C 2-50
Print Unable
08
Turn the power off
and then back on
again.
An error occurred in the internal
temperature sensor.
0800 2-50
Print Unable
09
Turn the power off
and then back on
again.
Detected irregular power supply
for more than 100 times.
0900 2-51
Print Unable
0A
Turn the power off
and then back on
again.
Main PCB detected the fan
failure.
0A02 2-51
Print Unable
0B
Turn the power off
and then back on
again.
An error occurred in the high-
voltage power supply PCB while
operating.
0B01 2-52
An error occurred in the high-
voltage power supply PCB
when the machine was in the
ready state.
0B02 2-52
Print Unable
0C
Turn the power off
and then back on
again.
An error occurred in the density
sensor.
0C00 2-52
Print Unable
0E
Turn the power off
and then back on
again.
An error occurred during the
high-voltage power supply PCB
ID check.
0E00 2-52
Error message
Description
Error
codes
Refer
to:
First line Second line
To Next Page
Loading...
