2-42
Confidential
Print Unable
10
Turn the power off
and then back on
again.
The registration mark sensor R
is dirty and cannot normally
receive reflected light.
1003 2-53
The registration mark sensor L
is dirty and cannot normally
receive reflected light.
1004 2-53
Print Unable
1D
Turn the power off
and then back on
again.
A communication error occurred
in the LED ASSY (black).
1D01 2-54
A communication error occurred
in the LED ASSY (yellow).
1D02 2-54
A communication error occurred
in the LED ASSY (magenta).
1D03 2-54
A communication error occurred
in the LED ASSY (cyan).
1D04 2-54
Print Unable
1E
Turn the power off
and then back on
again.
Main PCB and LED control PCB
cannot access each other.
1E01 2-54
Cannot read/write in the main
PCB and LED control PCB.
1E02 2-54
Print Unable
2E
Turn the power off
and then back on
again.
Could not communicate with the
cartridge sensor on the machine
side.
2E00 2-56
Cartridge sensor on the
machine side does not work.
2E02 2-56
Cartridge sensor version on the
machine side is not available.
2E04 2-56
Print Unable
38
Turn the power off
and then back on
again.
A temperature error occurred in
the external temperature/
humidity sensor.
3801 2-56
Print Unable
3A
Turn the power off
and then back on
again.
A communication error occurred
between the controller and
engine in main PCB.
3A00 2-57
Print Unable
DB
Turn the power off
and then back on
again.
A communication error occurred
between the main ASIC and the
recording ASIC.
DB00 2-81
Print Unable
E0
Turn the power off
and then back on
again.
An error occurred at the ROM
check sum in the firmware.
E000 2-81
Print Unable
E1
Turn the power off
and then back on
again.
Program error
E100 2-81
Print Unable
E5
Turn the power off
and then back on
again.
An error occurred during access
to the DRAM in the main PCB.
E500 2-81
Error message
Description
Error
codes
Refer
to:
First line Second line
To Next Page
Loading...
