BT REFLEX RR B7-8C - 24.8 Error Codes; 24.8.1 Error mode

Valid from serial number T-code
713962- 403-414, 669-671, 716-718
Order number Date
218920-040 2005-06-01
© BT Europe AB Service Manual REFLEX RR B/E, RR B/E CC 24- 25
Electronic card – 5710
Error Codes
24.8 Error Codes
The last 50 errors are stored in the error log with the date and time.
24.8.1 Error mode
Warning codes 3 –99 give a warning signal of 2 Hz.
Error codes 100– give a warning signal of 4 Hz.
Error mode Explanations/corrective actions
Start error The truck starts, no driving or hydraulic functions
Critical error Steering safety relay makes
Main contactor opens
Parking brakes are activated
General error Current function stops
Height error Fork lift at low speed
Emergency
switch on
Main contactor opens
Parking brakes are activated
Steering error Steering safety relay makes
Drive motor reverses to stop
Drive regulator
error
Main contactor opens
Lift regulator error
Steering enabled
Parking brake activated when braking
Lift regulator
error
Hydraulics stop
Valves closed
https://www.forkliftpdfmanuals.com/