BT REFLEX RR B7-8C - 45.21.1 Dismantling; Material handling

Valid from serial number T-code
713962- 403-414, 669-671, 716-718
Order number Date
218920-040 2005-06-01
© BT Europe AB Service Manual REFLEX RR B/E, RR B/E CC 45- 23
Instructions for destruction
Electric steering system (4300)
45.21.1 Dismantling
• Remove the wrist support (1).
• Remove the arm cushion (2).
• Remove the upper (3) and lower (4) steering panels.
• Remove the knob on the steering wheel (5), the steering wheel (6)
and the motor (7).
• Remove the console (8) and the arm (9).
Material handling
Place the wrist guard, the control cushion and knob from the steering
wheel in a container intended for combustible material.
The upper and lower steering panels have been material coded and
must be placed in the container intended for that material.
Place the motor, steering wheel and arm in a container intended for
complex scrap.
Place the console in a container intended for iron and steel scrap.
Place the other fittings in a container intended for combustible material
or complex scrap.
https://www.forkliftpdfmanuals.com/