BT REFLEX RR B7-8C - 6- Oil and grease specification - P3

Valid from serial number T-code
713962- 403-414, 669-671, 716-718
Order number Date
218920-040 2005-06-01
© BT Europe AB Service Manual REFLEX RR B,E RR B,E CC 6- 1
Oil and grease specification – P3
6- Oil and grease specification – P3
* Similar products from other manufacturers may be used.
Pos. Lubrication
type
Specification Use
> - 15°C < - 15°C
A Grease BT 26777 (Spray) BT 26777 (Spray) Bearings and bushings
B Hydraulic oil ISO-L-HM32 ISO-L-HV32 Hydraulic System
C Transmission oil Hypoid oil
SAE 80W/90
Hypoid oil
SAE 75W
Gears
D See table below Chains and wires
F Grease BT 055-70111 BT 055-74320 Side shift forks
G Grease Topas NB 52 Topas NB 52 Steering motor gears
H Grease Grafloscan
A-G1 (Klüber)
Grafloscan
A-G1 (Klüber)
Gear ring
I Graphite-type
grease
Q8 Rembrandt EP2
(223690)
Q8 Rembrandt EP2
(223690)
See C-code 7400
J Calcium-based
grease
Q8 Ruysdael WR2 Q8 Ruysdael WR2 See C-code 7400
K Copper paste See C-code 7400
Pos Ambient tem-
perature
Viscosity
class
Recommended products*
D
> - 40
°
C
< - 30
°
C
VG 15 Klüberoil 4UH 1-15, Klüber Lubrication
D
> - 30
°
C
< + 5
°
C
VG 68 Klüberoil 4UH 1-68N, Klüber Lubrication
Anticorit LBO 160 TT, Fuchs DEA
D
> + 5
°
C
< +45
°
C
VG 150 Klüberoil 4UH 1-150N, Klüber Lubrication
Anticorit LBO 160, Fuchs DEA
Rexoil, Rexnord Kette
D
>+ 45
°
C
<+ 80
°
C
VG 220 Klüberoil 4UH 1-220N, Klüber Lubrication
https://www.forkliftpdfmanuals.com/