BT REFLEX RR B7-8C - 39.3 Layout; 39.3.1 Main window; 39.3.2 Nodes

T-code Valid from serial number
403-414, 669-671, 716-718 713962-
Date Order number
2005-06-01 218920-040
39- 2 Service Manual REFLEX RR B/E, RR B/E CC © BT Europe AB
Control/computer equipment – 8700
Layout
39.3 Layout
39.3.1 Main window
When the program starts, the main window, consisting of a menu row,
tool buttons, work area, log window and status window, opens.
39.3.2 Nodes
The units connected to and communicating via the CAN interface are
called nodes. The nodes detected on the bus are shown in the node
window. The current node status and incorporated components/infor
-
mation are displayed using various icons.
Nodes
Tool
Icons
buttons
Information
window
Status list
Menu row
Fig. 1Main window for TruckCom
Fig. 2A typical screen of the node
window
https://www.forkliftpdfmanuals.com/