BT REFLEX RR B7-8C - 30.4.1 Dismantling the rod seal, guide ring, guide ring holder and locking ring in lift cylinder; 30.4.2 Fit the locking ring, rod seal, guide ring and guide ring holder in the lift cylinder

Valid from serial number T-code
713962- 403-414, 669-671, 716-718
Order number Date
218920-040 2005-06-01
© BT Europe AB Service Manual REFLEX RR B/E, RR B/E CC 30- 3
Main lift cylinder – 6610
Dismantling the cylinder
30.4.1 Dismantling the rod seal, guide ring,
guide ring holder and locking ring in lift
cylinder
• Remove the clamping ring (8).
• Remove the rod seal (7).
• Dismantle the guide ring holder (5).
• Remove the guide ring (6) from the guide ring holder (5).
• Remove the retainer rings (4).
30.4.2 Fit the locking ring, rod seal, guide ring
and guide ring holder in the lift cylinder
• Fit the locking ring (4) on the rod using tool
08-15368, 08-15369 and 08-15370.
• Assemble the guide ring (6) on guide ring holder (5).
• Assemble the guide ring holder (5) on the rod.
• Place the assembly tool 08-15367 on the rod.
• Place the rod seal (7) on the assembly tool
08-15366.
• Assemble the rod seal (7) on the rod.
• Fit the clamping ring (8).
123
45678910
https://www.forkliftpdfmanuals.com/