Valid from serial number T-code
713962- 403-414, 669-671, 716-718
Order number Date
218920-040 2005-06-01
© BT Europe AB Service Manual REFLEX RR B,E RR B,E CC 41- 1
Positioning equipment – 9390
General
41- Positioning equipment – 9390
41.1 General
This chapter is about height indication and height pre-set.
The height indication system comprises a tachometer that measures
impulses on a wire and relays them to the control card.
The control card then relays the signals to a display panel showing the
height of the forks.
The height pre-set receives impulses from the height indication system.
On the height pre-set, you can program the height at which the forks will
stop to pick up and deposit loads.
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...