BT REFLEX RR B7-8C - 33.3.6 Assembling the rod seal; 33.3.7 Assembling the cylinder; 33.3.8 Assembling the fork carriage

Valid from serial number T-code
713962- 403-414, 669-671, 716-718
Order number Date
218920-040 2005-06-01
© BT Europe AB Service Manual REFLEX RR B/E, RR B/E CC 33- 7
Tilt cylinder – 6660.1
Mast without valve on the fork carriage
33.3.6 Assembling the rod seal
• Press on the rod seal carefully.
33.3.7 Assembling the cylinder
• Insert the rod in the cylinder.
• Tighten with the 8 bolts.
33.3.8 Assembling the fork carriage
• Fit the tilt cylinder using bolts (6).
• Lift the fork yoke in position.
• Knock the axles (5) in position.
• Bolt the axles in position using the bolts (4) and washers (3).
• Fit the forks.
https://www.forkliftpdfmanuals.com/