Valid from serial number T-code
713962- 403-414, 669-671, 716-718
Order number Date
218920-040 2005-06-01
© BT Europe AB Service Manual REFLEX RR B,E RR B,E CC 43- 1
Truck log system, code lock – 9420
General
43- Truck log system, code lock –
9420
43.1 General
BT TLS truck logging system
The truck can be equipped with various models and combinations of
code lock called TLS.
The TLS truck logging system is designed to allow only trained truck
drivers to start the truck. Depending on the system used, you start the
truck by entering your personal code on the keyboard or using the per
-
sonal code card.
When you have entered the right code, the truck can be driven. Once
the correct code has been used, this is confirmed by the display lighting
up or is indicated by other visual means.
The time the truck has been used is registered in the truck log on SD
16.
43.2 SD 16
43.2.1 Login with code (5-digit)
Each time you start the truck, you must enter your personal five-digit
code.
• Enter your personal code on the keyboard, 00001, 00002 or 00003
and press the green button (standard code for the first log-in) to start
the truck.
If you enter the wrong code, the red LED will light up. Once it goes out,
you can start again.
To change the login code, see Davis Derby information.
43.2.2 Logout
You must always log out when leaving the truck.
• Press the red button on the keyboard to log out and to prevent the
truck from being driven.
If you have not logged out, the TLS will log out automatically after a pre-
set length of time.
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...