Valid from serial number T-code
713962- 403-414, 669-671, 716-718
Order number Date
218920-040 2005-06-01
© BT Europe AB Service Manual REFLEX RR B/E, RR B/E CC 33- 1
Tilt cylinder – 6660.1
General
33- Tilt cylinder – 6660.1
33.1 General
The fork tilt cylinder is located on the mast behind the lower edge of
the fork yoke.
The cylinder is double acting, which means it is the oil pressure that
moves the ram backwards and forwards in the cylinder. When the ram
is pressed out, the lower edge of the fork yoke is moved outwards and
in doing so the forks are tilted upwards.
This document is divided into two chapters:
•Mast with valve on the fork carriage.
•Mast without valve on the fork carriage.
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...