T-code Valid from serial number
403-414, 669-671, 716-718 713962-
Date Order number
2005-06-01 218920-040
24- 70 Service Manual REFLEX RR B/E, RR B/E CC © BT Europe AB
Electronic card – 5710
Error Codes
Main contactor, K10, contactor points
1. Check the voltage on terminal 808. It must be 0 VDC when the
red pushbutton on the keypad is depressed.
- If there is voltage, check whether the contactor points on K10 are
welded together.
- If the contactor points are okay, check that cable 23 is not short-
circuited to any live parts.
2. If the voltage is 0 VDC on the card's terminal 808 and the fault
remains, replace the A5 card.
Code 108
Description The main contactor does not open when the red
pushbutton on the keypad is depressed and the
emergency stop switch does not operate
Error mode Critical error
Error cause 1. Defective contactor K10
2. Defective electronic card A5
Comments
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...