Valid from serial number T-code
713962- 403-414, 669-671, 716-718
Order number Date
218920-040 2005-06-01
© BT Europe AB Service Manual REFLEX RR B/E, RR B/E CC 24- 75
Electronic card – 5710
Error Codes
Steering motor, M6
1. Check the cables 60 and 61, terminal X24 and terminals 903
and 904.
2. Check the steering motor.
- Regarding the carbons and carbon holders, see C-code 1730
“Electric steering motor”.
- Armature windings.
3. If the fault remains, replace the A5 card.
Code 123
Description Output voltage to steering motor differs from
requested steering
Error mode Steering error
Error cause 1. Faulty wiring to steering motor
2. Defective steering motor
3. Defective electronic card A5
Comments
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...