T-code Valid from serial number
403-414, 669-671, 716-718 713962-
Date Order number
2005-06-01 218920-040
37- 14 Service Manual REFLEX RR B,E RR B,E CC © BT Europe AB
Lifting devices – 7400
Troubleshooting
Too much tolerance
between the inner
and outer fork
Outer forks are worn
or have been over
-
loaded which caused
the underside of the
outer forks to be per
-
manently deformed
Replace outer forks.
Table 9:
Table 10: Troubleshooting
Symptom Possible Cause Possible Solution
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...