T-code Valid from serial number
403-414, 669-671, 716-718 713962-
Date Order number
2005-06-01 218920-040
41- 4 Service Manual REFLEX RR B,E RR B,E CC © BT Europe AB
Positioning equipment – 9390
Display
When supply voltage is connected to terminal 1, the display can be
used for length display.
Unscrew the four screws and strap across clamp J1 to switch the dis-
play from metres to inches.
Terminal
number
Connection Function
1 I Switching to length display
2 I RX (-) receives data
3 I +48 V
4 I Negative
5 I RX (+) receives data
Display Remarks
Permanently-lit decimal
points
The forks are below the reference
height
Flashing decimal points The forks are above the reference
height with the ignition on
Four straight lines Communication error with the truck
computer
12
3
4
5
J1
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...