22
Technical data
6.3 Technical data of the dosing controller 8025 Batch
in wall-mounted version
6.3.1 Conditions of use of a 8025 Batch in wall-mounted version
Ambient temperature
–10...+60°C
Air humidity
< 80%, non condensated
Protection rating
according to EN 60529
IP65,
device wired, cable glands tightened, cover lid
screwed tight and entry item nuts of the cable glands
tightened at a screwing torque of 1.5 Nm.
Degree of pollution (UL and CSA recognized version)
Degree 2 according to EN 61010 -1
Installation category (UL and CSA recognized version)
Category I according to UL61010-1 - Indoor use
Max. height above sea level
2000 m
6.3.2 Conformity to standards and directives of a 8025 Batch in
wall-mounted version
The applied standards, which verify conformity with the EU Directives, can be found on the EU Type Examination
Certificate and/or the EU Declaration of Conformity (if applicable).
UL-Certification
Finished products with variable key PU01 or PU02 are UL-certified products and comply also with the following
standards:
• UL 61010-1
• CAN/CSA-C22.2 n°61010-1
Identification on the device Certification Variable key
UL-recognized PU01
Measuring
Equipment
EXXXXXX
®
UL-listed PU02
6.3.3 Material data of a 8025 Batch in wall-mounted version
Part Material
Housing / Cover ABS
Frontfoil / Screws Polyester / Stainless steel
Cable glands PA
Identification label Polyester
English
Type 8025 - 8035 - SE35 BATCH
To Next Page
Loading...
