97
Operating and functions
10.7.9 Configuring the dosing mode "EXT. MEM."
This dosing mode allows for starting the dosing, via the digital inputs, of a quantity saved in the memory.
OPtiONAL MODE EXt. MEM.
→ Confirm.
VOLUMES
→ Confirm.
→ Enter up to 7 dosing quantities into the memory. See chap. 10.7.14.
Fig. 67 : Configuring the dosing mode "EXT. MEM."
→ If you do not want to adjust another parameter, go to the "END" parameter of the Parameters menu and press
ENTER
to save the settings or not and go back to the Process level.
10.7.10 Configuring the dosing mode "EXT. +LOC"
This dosing mode allows for selecting a quantity saved in the memory, via the navigation keys (or via the digital
inputs), then starting the dosing via the digital input DI4.
OPtiONAL MODE EXt. +LOC.
→ Confirm.
VOLUMES
→ Confirm.
→ Enter up to 7 dosing quantities into the memory. See chap. 10.7.14.
Fig. 68 : Configuring the dosing mode "EXT. +LOC."
→ If you do not want to adjust another parameter, go to the "END" parameter of the Parameters menu and press
ENTER
to save the settings or not and go back to the Process level.
10.7.11 Configuring the dosing mode "EXT. [T]"
• In this mode, the dosing starts as soon as the digital input DI1 is switched.
• If the conditions for calculating A and B are not respected, an alarm ERROR [T] will be generated
and the device will abort the current dosing.
English
Type 8025 - 8035 - SE35 BATCH
To Next Page
Loading...
