Burkert 8035 - Configuring the Dosing Mode (General Diagram)

95
Operating and functions
10.7.5 Configuring the dosing mode (general diagram)
OPtiONAL
V1
V7
0......9
VOLUMES
0......9
REtURN
Enter up to 7 dosing quantities into the memory.
These quantities are then available when the dosing
mode "LOC. MEM", "MEM+MANU", "EXT. MEM" or
"EXT. +LOC" is active.
See chap. 10.7.14.
LOC. MANU.
EXt. +LOC.
EXt. [t]
EXt. REP.
0......9
MODE
LOC. MEM.
MEM.+MANU.
EXt. MEM.
REtURN
LOC. REP.
Configuring the dosing mode for starting, via the navigation
keys, the dosing of the quantity determined by a Teach-In
procedure. See chap. 10.7.13.
Configuring the dosing mode for entering a dosing quantity
and starting the dosing, via the navigation keys, See
chap. 10.7.6.
Configuring the dosing mode for starting the dosing, via
the navigation keys, of a quantity saved in the memory. See
chap. 10.7.7.
Configuring the dosing mode for:
• either entering a dosing quantity and starting the dosing,
via the navigation keys,
• or starting the dosing, via the navigation keys, of a
quantity saved in the memory. See chap. 10.7.8.
Configuring the dosing mode for starting the dosing, via
the digital inputs, of a quantity saved in the memory. See
chap. 10.7.9.
Configuring the dosing mode for selecting a quantity saved
in the memory, via the navigation keys (or via the digital
inputs), then starting the dosing via the digital input DI4.
See chap. 10.7.10.
Configuring the dosing mode for starting the dosing of a
quantity proportional to the activation duration of the digital
input DI1. See chap. 10.7.11.
Configuring the dosing mode for starting, via the digital
inputs, the dosing of the quantity determined by a Teach-In
procedure. See chap. 10.7.12.
Fig. 63 : Diagram of the "OPTIONAL" parameter of the Parameters menu
English
Type 8025 - 8035 - SE35 BATCH