32
Operating and functions
9. OPERATING AND FUNCTIONS
9.1. Safety instructions
WARNING
Risk of injury due to nonconforming adjustment.
Nonconforming adjustment could lead to injuries and damage the device and its surroundings.
• The operators in charge of adjustment must have read and understood the contents of this manual.
• In particular, observe the safety recommendations and intended use.
• The device/installation must only be adjusted by suitably trained staff.
9.2. Functions
The device has 2 operating levels:
Read level
This level is used:
• to read the measured values of 2 process values selected in the Parameters menu,
• to read both the lowest and highest values of the chosen process value, that have been measured by the
device since the latest reset (this feature is not active by default),
• to reset both the lowest and highest values of the chosen process value, if the feature has been activated,
• to read the current values emitted on the 4-20 mA outputs.
Settings level
This level comprises 5 menus:
Menu title Relevant icon
"Param": see chap. 9.11
This is
when the
device is be-
ing parame-
tered............
....................
"Calib": see chap. 9.12
"Diagnostic": see chap. 9.13
"Test": see chap. 9.14
"Info": see chap. 9.15
English
Type 8202 ELEMENT
To Next Page
Loading...
