Burkert 8202 ELEMENT User Manual

6
Intended use
2. INTENDED USE
Use of this device that does not comply with the instructions could present risks to people, nearby
installations and the environment.
• The 8202 transmitter is intended solely for the measurement of:
- the pH in clean liquids or liquids containing solids, sulphides or proteins.
- or the oxidation reduction potential in clean liquids or liquids containing solids, sulphides or proteins which
may present low conductivity.
• This device must be protected against electromagnetic interference, ultraviolet rays and, when installed out-
doors, the effects of climatic conditions.
• This device must be used in compliance with the characteristics and commissioning and use conditions
specified in the contractual documents and in the user manual.
• Requirements for the safe and proper operation of the device are proper transport, storage and installation, as
well as careful operation and maintenance.
• Only use the device as intended.
2.1. Restraints
Observe any existing restraints when the device is exported.
English
Type 8202 ELEMENT

Burkert 8202 ELEMENT Specifications

General

Brand	Burkert
Model	8202 ELEMENT
Category	Measuring Instruments
Language	English