Burkert 8202 ELEMENT - Parameters Menu; Transferring Data From One Device To Another

42
Operating and functions
System
Code 0*** Confirm code 0***
Test
Value:
Sensor
INPUT
Outputs
AC2:
AC1: INPUT
INPUT
TR1: OFF/ON
TR2: OFF/ON
Info Error
MESSAGE
MESSAGEWarning
Versions
MESSAGEMaintenance
MESSAGESmiley
Main
Sensor
READ
READ
PVar: pH
TempC
mV_pH
mV_ORP
TempF
Software
9.11. Parameters Menu
9.11.1. Transferring data from one device to another
See chap. 9.9 to access the Parameters menu.
The function is only possible with a display module with software version V2 and a transmitter with a V2
software version of the acquisition / conversion module for the measured process values.
• On the transmitter, check the sofware version of the acquisition / conversion module for the measured
process values in the menu Info -> Software -> Versions -> Main.
• The software version of the display module is displayed when the display module is energized.
• The “DOWNLOAD” function is only available if an UPLOAD has been successfully performed.
• Never interrupt an upload or download procedure else the transmitter may be damaged.
SystemParam
Up/Download Download
Upload
This is
when the
device is be-
ing parame-
tered............
....................
This is
when the
device is be-
ing parame-
tered............
....................
Downl. Yes/No
Upload Yes/No
English
Type 8202 ELEMENT