Cadex C7000 - Selecting a Program or Setting Target Capacity

Selecting a Program or Setting Target Capacity
The following procedures describe how to select a program and/or set the Target
Capacity
before a battery is inserted. To select a program and/or set the Target
Capacity when a battery is inserted for service, follow the procedures in
Basic Battery
Service
.
1. Press the station key, then use the
""
""
" and
!!
!!
! keys to find the C-Code for which
you want to select the program and/or set the Target Capacity.
2. Press Prog.
3. Select the desired program, depending on which program list you are in:
••
••
• If you are in the Basic Program list
••
••
• If you are in the Specialty Program list
4. Set the Target Capacity using the keypad or
""
""
" and
!!
!!
! keys.
5. Press ENTER to confirm.
PROGRAM
SETTINGS
OhmTest
Runtime
Self-Discharge
Life-Cycling
Discharge Only
Extended Prime
Custom 1
Custom 2
Custom 3
Custom 4
BASIC PROGRAMS
ENTER
PROGRAM
SETTINGS
Auto
Charge
Prime
SPECIALTY PROG.
ENTER
24 C7000 & 7000ER Battery Analyzer V3.5