Cadex C7000 - Firmware Upgrade: Resetting the System; Connecting to Batteryshop

Firmware Upgrade: Resetting the System
If you are upgrading the analyzer firmware to V3.5 from an older version, you
need to reset the system to the factory defaults to erase the old system
parameters.
Some of the parameters that are reset include:
• OhmTest, Runtime, Self-Discharge, Life-Cycling and Custom Programs
• Battery Startup settings
• Parallel Port Device to Printer
• Serial Port Device to LabelMaker
• Voltage Display to Volts/Cell
• Number of batteries serviced (Service Counter) to 0
! Press and release the Alt key, then press 0.
Note that this function also serves as a general system reboot.
Connecting to BatteryShop™
BatteryShop™ is a powerful Windows-based battery management tool that
allows automation of the C7000 and C7000ER functions to increase productivity.
• Provides control and monitoring of large scale battery services by
connecting up to 120 analyzers to service 480 batteries simultaneously.
• Contains a database of over 2000 battery models that provides easy
access to C-Code settings and other information. Even a novice user can
perform a variety of tests and programs.
Refer to
Serial and Parallel Device Settings or BatteryShop Help on preparing
the analyzer for BatteryShop.
To find out how BatteryShop can enhance your battery maintenance system,
contact Cadex.
Overview 1
3