8
System Security
The C7000 and C7000ER offer three security levels for protection against
tampering: Level 0 (Off) is the default, Level 1 (Low) and Level 2 (High).
Depending on the security level, you will be asked to enter the password for some
features.
A password must have at least 3 digits.
You can control the access to the features
by setting the security level.
Password Requirement
41
Level 0 (Off) Level 1 (Low) Level 2 (High)
C-Code Not required Edit C-Code Edit C-Code
Set Default C-Code
Security
Not required Set Security
Change Password
Remove Security
Set Security
Change Password
Remove Security
System Setup
Not required Time/Date
Program Settings
Output Devices
Time/Date
Battery Startup
Program Settings
Company Name
Calibration
Output Devices
Sound Control
Voltage Display
Print Utilities
Not required Auto-Print Battery Service Report
Battery Label
Bar-Code Label
System Setup Report
Auto-Print
Event Log
Not required Clear Event Log
Events to Log
Clear Event Log
Events to Log
To Next Page
Loading...
