Cadex C7000 - Creating or Modifying a Custom Program

Creating or Modifying a Custom Program
1. Select Program Settings on the menu. Refer to Menu .
2. Select the program. For example, Custom 1.
3. Press Prog. If applicable, enter the program name, then press ENTER. You
can enter up to 9 characters/numbers. Otherwise press Esc to skip.
4. Enter the program settings.
! Use the
""
""
" and
!!
!!
! keys to scroll through the phases and cycles or select
the settings. Move between the fields using the
$$
$$
$ and
##
##
# keys.
5. Press ENTER when all the settings are entered, then select Yes to accept
changes.
40 C7000 & 7000ER Battery Analyzer V3.5