Cadex C7000 - Viewing C-Codes; Managing C-Codes

To Next Page

To Previous Page

Viewing C-Codes

! Press the station key, then use the

" and

! keys scroll through the basic C-Codes

and the

and

keys to view the extended C-Code parameters.

Managing C-Codes

! Press the station key to display the basic C-Code, then:

*Refer to

Default Settings for Extended C-Codes

30 C7000 & 7000ER Battery Analyzer V3.5

To Procedures

Select a C-Code

Edit a C-Code

Delete a C-Code

Create a C-Code

Reset Extended

C-Code to default*

Copy a C-Code

Copy all C-Codes

to another adapter

Add, edit or erase

a battery setup

name

Scroll to the C-Code with the

" and

! keys, then press ENTER

and select Yes. The “

!” appears beside the C-Code number on

the display.

Scroll to the C-Code with the

" and

! keys, then press CCode.

Use the

" and

! keys or the keypad to change the settings.

Advance or go back using the

$ and

# keys. Then press ENTER

and select Yes.

Scroll to the C-Code with the

" and

! keys, then press Fn-0 and

select Yes.

Scroll to an empty C-Code with the

" and

! keys, then press

CCode. Use the

" and

! keys to select or the keypad to enter

the settings. Advance or go back using the

$ and

# keys. Then

press ENTER and select Yes. Select Yes again to select the new

C-Code.

Scroll to the C-Code with the

" and

! keys, then press Fn-1 and

select Yes.

Scroll to the C-Code with the the

" and

! keys, then press Fn-3.

Press the station key of the adapter to copy to, scroll to the C-

Code (usually an empty one) and press ENTER, then select Yes

again.

Press Fn-6. Then press the station key of the adapter to copy to

and select Yes.

Scroll to the C-Code with the

" and

! keys, then press Fn-7. Use

the

" and

! keys or the keypad to enter, edit or erase the battery

setup name. Advance or go back using the

$ and

# keys. Then

select Yes.

Main Page

Cadex C7000 - Viewing C-Codes; Managing C-Codes

Table of Contents

Related product manuals