Cadex C7000 - Firmware

Firmware
74 C7000 & 7000ER Battery Analyzer V3.5
Firmware Version Version 3.5
Supported Chemistries NiCd NiMH SLA Li-Ion
Supported Settings All Types All Types Gell, Hawker All Types
Voltage
C7000-1, 2 & 9 1.2V-14.4V 1.2V-14.4V 2.0V-16.0V 3.6V-14.4V
C7000-ER 1.2V-28.8V 1.2V-28.8V 2.0V-30.0V 3.6V-28.8V
Battery Rating/
Capacity
100mAh-
24,975mAh
100mAh-
24,975mAh
100mAh-
24,975mAh
100mAh-
24,975mAh
Charge Method Reverse Load Constant voltage with current limit
Display Format
Capacity Percentage of nominal rating
Voltage Volts/Cell or Volts
Temperature
o
C
Resistance m
Auto Service
Frequency (Standby)
30 Days 30 Days 180 Days 30 Days
Security
3 Level Password Enabled Security (Off, Low, High)
Outputs
Battery Labels, Bar Code Labels, Battery Service Reports, System
Setup Reports
Printer Support Epson compatible dot-matrix (9-pin), DYMO LabelMaker SE300 Printer
Ω