64 C7000 & 7000ER Battery Analyzer V3.5
Code Detail Global
031 DISCHARGE CYCLE COMPLETE END CYCLE
032 CYCLE RESUMED RESUMED
033 USER PROGRAMMED TIMEOUT END CYCLE
034 BATSHOP MODE WAIT BATSHOP
035 SM-BUS ADAPTER INSERTED SM ADP IN
036 SMART BATTERY INSERTED SM BAT IN
112 CELL MISMATCH WARNING
113 PLATEAU TIMEOUT WARNING
115 TARGET CAPACITY NOT MET WARNING
118 SOFT BATTERY STEP DOWN WARNING
120 OVER VOLTAGE FAIL 120
121 SHORTED OR REVERSED SHORT/REV
122 BATTERY SHORTED FAIL 122
123 LOW VOLTAGE TIMEOUT 1 FAIL 123
124 LOW VOLTAGE TIMEOUT 2 FAIL 124
125 NO SLOPE TIMEOUT ZONE 1 FAIL 125
126 LOW VOLTAGE NEGATIVE SLOPE FAIL 126
127 LOW VOLTAGE TIMEOUT 3 FAIL 127
128 SOFT BATTERY FAIL 128
129 INTERMITTENT BATTERY FAIL 129
130 CURRENT RISE WARNING
135 RESISTANCE THRS. EXCEEDED FAIL 135
142 DISCHARGE TIMEOUT FAIL 142
144 CHARGE TIMEOUT FAIL 144
146 RECONDITION TIMEOUT WARNING
150 THERMISTOR FAILURE FAIL 150
152 LOW VOLTAGE TEMP. RISE FAIL 152
154 CHRG COMPLETE TEMP. RISE WARNING
156 HOT AT LOW VOLTAGE FAIL 156
158 CHARGE COMPLETE HOT WARNING
159 TRICKLE CHARGE OVERHEAT FAIL 159
160 BAD FUSE OR DRIVER FAIL 160
To Next Page
Loading...
