8. Press ESC twice to return to the global display.
Manually Print Reports and Labels
By default, the analyzer prints battery labels or battery service reports manually.
Print the report before removing the battery. Once the battery is removed, service
data is deleted from the analyzer and cannot be recovered. If service data needs to
be kept, BatteryShop is recommended.
Note Make sure the printer or a label printer is connected to the analyzer and it
is working (see Connecting to BatteryShop or a Printer, page 71).
Tip Reports and labels can be printed through the menu under PRINT UTILITIES.
Print a battery service report
1. Perform the required service on the battery. Do not remove the battery
from the adapter.
2. Press PRINT.
3. Press the station key of the station that contains the battery.
4. Press or to scroll to BATTERY SERVICE REPORT.
5. Press ENTER.
Print an adapter setup report
1. Press PRINT.
2. Press the station key of the station that contains the battery.
3. Press or to scroll to ADAPTER SETUP REPORT.
4. Press ENTER.
Print a system setup report
1. From the global display, press MENU.
2. Press or to scroll to PRINT UTILITIES and press ENTER.
87
To Next Page
Loading...
Need help?
General
