4. Press or to the required setting (see Appendix B – Charge
Algorithms, page 148)
• 2°C RISE PER: 2 MINUTES
• 2°C RISE PER: 3 MINUTES (default)
• 2°C RISE PER: 4 MINUTES
5. Press ENTER.
6. Press or to scroll to YES to accept changes and press ENTER.
7. Press ESC twice to return to the global display.
Saving Program and Target Capacity Settings
By default, when program and target capacity settings are changes, they are saved
in the C-code and stored in the Battery Adapter.
The Cadex analyzer can save these changes to the battery station rather than to
the C-code. Settings saved to the station are independent of setting Battery
Adapter inserted in the station. Program and target capacity settings programmed
into the analyzer station will override the C-codes programmed in the adapter.
Saving program and target capacity is useful if there are several Cadex analyzers
and a unit is dedicated to one specific program or target capacity.
To set the method of saving changes to program and target capacity
1. From the global display, press MENU.
2. Press or to scroll to OPTION CONTROLS and then press ENTER.
3. Press or to scroll to PROGRAM/TARGET CHANGES and then press
ENTER.
4. Press or to scroll to the required setting:
C-CODE (default) saves any changes made to the program settings or the target
capacity to the active C-code.
Cadex Electronics Inc. C7000-C Series Battery Analyzers .
80
To Next Page
Loading...
Need help?
General
