3. Press or to scroll through the extended C-code parameters.
4. After viewing the C-code parameters, press ESC once or twice to return
to the global display.
Change Target Capacity or Program
1. From the global display, press the station key.
2. Press EDIT.
3. Press or to scroll to the desired program.
4. Press or to move to the target capacity field.
5. Press or or use the keypad to enter the desired target value.
6. Press ENTER.
7. Press or to scroll to YES to accept changes and press ENTER.
8. Press ESC twice to return to the global display.
Create or Edit a C-code
1. From the global display, press the station key.
2. Use the or key to scroll to an empty C-code or to the C-code to
edit.
An empty C-code contains no battery chemistry (TYPE) and VOLTS and mAh are set
to 0.
3. Press EDIT.
4. Select the program to run:
a) Press or to scroll to the basic program to run.
b) Press to select the program and move to TARGET.
Or
a) Press or to scroll through the basic programs to ADVANCED.
b) Press .
Cadex Electronics Inc. C7000-C Series Battery Analyzers .
62
To Next Page
Loading...
Need help?
General
