d) Press or to scroll to YES to accept changes and press
ENTER.
14. Press ESC twice to return to the global display.
The message CHANGES ACCEPTED appears on the display.
Add or Edit the C-code Setup Name
1. From the global display, press the station key.
2. Press or to scroll to the C-code.
3. Press ALT, and then press EDIT.
4. Press or to scroll through upper case letters, lower case letters,
punctuation marks, numbers, and a space (which looks like an
underscore) to select characters for the setup name.
5. Press or to move the cursor between character positions within
the setup name. There are ten positions available.
6. Press ENTER.
7. Press or to scroll to YES to accept changes and press ENTER.
8. Press ESC twice to return to the global display.
Reset Extended C-code to the Default settings
1. From the global display, press the station key.
2. Use the or key to scroll to the C-code.
3. Press FN and then press 1.
4. Press or to scroll to YES to accept changes and press ENTER.
5. Press ESC twice to return to the global display.
(see Default Extended C-code Settings, page 57).
Cadex Electronics Inc. C7000-C Series Battery Analyzers .
64
To Next Page
Loading...
Need help?
General
