Program Parameters
There are a number of settings available that affect the way the Cadex analyzer
functions in most or all of its programs.
Starting Battery Service
By default, when a battery is inserted into the Cadex analyzer, the analyzer
prompts to verify the C-code before service starts. This verification can be turned
off so users can run a battery service as soon as a battery is inserted as follows:
• The Cadex analyzer asks for Battery ID number and asks to verify C-code
settings.
• The Cadex analyzer asks for Battery ID number only.
• The Cadex analyzer asks to verify C-code settings only (default).
• The Cadex analyzer starts the program using the active C-code without asking to
enter the Battery ID or verify the C-code.
To verify C-code or enter Battery ID before battery service begins
1. From the global display, press MENU.
2. Press or to scroll to OPTION CONTROLS and then press ENTER.
3. Press or to scroll to ASK FOR BATTERY ID #
4. Press or to scroll to the required setting:
• YES sets the Cadex analyzer to ask for the Battery ID number.
• NO (default) sets the Cadex analyzer not to ask for Battery ID
number.
5. Press or to scroll to ASK FOR BATTERY C-CODE
5. Press or to scroll to the required setting:
• YES sets the Cadex analyzer to ask the user to verify C-code
settings.
77
To Next Page
Loading...
Need help?
General
