Detailed
Message
Code Reasons Solutions
THERMISTOR
FAILURE
150
The battery temperature
reading is invalid.
Clean the contacts on the
battery.
Thermistors on non-OEM
batteries may not be the same
as that used on OEM
batteries. Contact Cadex to
upgrade the adapter. If the
battery is NiCd or NiMH, turn
off the temperature sensing.
If the battery is known to be
good or the adapter has two
contacts (in these adapters,
the negative contact is a
thermistor), the battery
thermistor is defective, contact
Cadex.
TRICKLE
CHARGE
3
The program is running a
trickle charge.
The reconditioning process
is complete, and the battery
is being recharged.
Cadex Electronics Inc. C7000-C Series Battery Analyzers .
146
To Next Page
Loading...
Need help?
General
