Canon EOS-7D - Page 130

130
Using Wireless FlashN
The built-in flash can also be added to wireless flash shooting explained
on pages 123-129.
The basic settings are shown below. By changing the [Firing group]
setting, you can shoot with various wireless flash setups of multiple
Speedlites complemented with the built-in flash.
1
Basic settings:
Flash mode : E-TTL II
E-TTL II : Evaluative
Wireless func. : [0+3]
Channel : (Same as slave units)
2
Select [Firing group].
 Select the firing group, then set the
flash ratio, flash exposure
compensation, and other necessary
settings before shooting.
Fully-automatic Shooting with the Built-in Flash and
Multiple External Speedlites
A B
C
80
o
Approx. 7m
(23.0ft.)
Approx.
5m (16.4ft.)
Approx.
7m
(23.0ft.)
Approx. 10m
(32.8ft.)
80
o
Approx. 7m
(23.0ft.)
Approx.
5m (16.4ft.)
Approx.
7m
(23.0ft.)
Approx. 10m
(32.8ft.)
AB
80
o
Approx. 7m
(23.0ft.)
Approx.
5m (16.4ft.)
Approx.
7m
(23.0ft.)
Approx. 10m
(32.8ft.)
[1 (A+B+C) 2][1 (A:B) 2][1 (A:B C) 2]