Canon EOS-7D - Start Printing

211
wPrinting
5
Set the date and file number
imprinting.
 Set as necessary.
 Select <
I>, then press <0>.
 Set as desired, then press <0>.
6
Set the number of copies.
 Set as necessary.
 Select <
R>, then press <0>.
 Set the number of copies, then press
<0>.
7
Start printing.
 Select [Print], then press <0>.
 With Easy printing, you can print another image with the same settings.
Just select the image and press the <
l> button. With Easy printing, the
number of copies will always be 1. (You cannot set the number of
copies.) Also, any trimming (p.213) will not be applied.
 The [Default] setting for printing effects and other options are the
printer’s own default settings as set by the printer’s manufacturer. See
the printer’s instruction manual to find out what the [Default] settings are.
 Depending on the image’s file size and image-recording quality, it may
take some time for the printing to start after you select [Print].
 If image tilt correction (p.213) has been applied, it will take longer to print
the image.
 To stop the printing, press <
0> while [Stop] is displayed, then select
[OK].
 If you execute [7 Clear all camera settings] (p.47) menu, all the
settings will revert to the default.